Tascam Sonicview 16, Справочное руководство

Страница: 112 / 188

7 – Other module parameter setting screens
SEND PAN (BUS) page
ON/OFF (INPUT) page (GROUP mode bus)
ON/OFF (BUS) page (GROUP mode bus)
NOTE
i
Tap a level while pressing the HOME key on the top panel to
set that level to 0 dB.
i
Tap a PAN/BAL indicator while pressing the HOME key to set
the tapped pan/balance setting to center (C).
1
button
Tap this button to return to the screen shown before the
SEND OVERVIEW Screen.
2
MODULE button
Tap this button to open the MODULE Screen for the selected
MIX 1–22 module.
3
/ buttons
Tap these buttons to move left and right in order between
MIX 1–22, FX 1–4 and MAIN L/R buses to show and activate
them for operation.
4
Module name
o
This shows the module name and user module name for
the selected bus. If the user module name has not been
defined, the module name will be shown as “MIX 1”, for
example.
o
Tap the user module name area to open the MODULE
NAME Screen where the user module name and set
module color can be changed. (See “MODULE NAME
screen” on page 122.)
5
button
Tap this button to open the SEND OVERVIEW menu for the
selected MIX 1–22 bus.
Tap menu items to change parameter settings for the
selected MIX 1–22 buses. (See “SEND OVERVIEW menu” on
page 118.)
6
Page selection buttons
Tap a page selection button to open that page.
The selected button will be highlighted.
Button Use
SEND LEVEL (INPUT)
This shows a list of SEND levels
from the CH 1–40, ST IN 1–2 and
FX RTN 1–4 modules to the MIX
1–22 buses.
SEND LEVEL (BUS)
This shows a list of SEND levels
from the MIX 1–22 and MAIN L/R
Master modules to the MIX 1–22
buses.
ON / OFF (INPUT)
This shows a list of assignment
on/off states from the CH 1–40,
ST IN 1–2 and FX RTN 1–4
modules to the MIX 1–22 buses.
ON / OFF (BUS)
This shows a list of assignment
on/off states from the MIX 1–22
and MAIN L/R Master modules to
the MIX 1–22 buses.
PRE / POST (INPUT)
This shows a list of signal send
positions from the CH 1–40, ST IN
1–2 and FX RTN 1–4 modules to
the MIX 1–22 buses.
SEND PAN (INPUT)
This shows a list of pan/balance
settings from the CH 1–40, ST IN
1–2 and FX RTN 1–4 modules to
the MIX 1–22 buses.
SEND PAN (BUS)
This shows a list of pan/balance
settings from the MIX 1–22
modules to the MIX 1–22 buses.
112
TASCAM Sonicview 16/Sonicview 24