7 – Other module parameter setting screens
r
MIX 1–22 module PAN/BAL
This shows a list of setting states for pan/balance from the
MIX 1–22 modules to the selected FX 1–4 bus.
Display range: L100 – C – R100 (default: C)
NOTE
FX 1–4 bus SEND PAN parameters are always linked to the
PAN/BAL settings of the corresponding modules (PAN LINK
setting is always on). They are shown dimly and cannot be
operated on this screen.
MAIN L/R bus SEND OVERVIEW Screen
Tap Menu Screen > Mixer Setup menu> MIX Send Overview
or Main L/R Assign Overview to open this screen. The SEND
OVERVIEW button at the top of the MODULE Screen for the
MAIN L/R Master module can also be tapped to open this screen.
FADER LEVEL (INPUT) page
FADER LEVEL (BUS) page
ON/OFF (INPUT) page
ON/OFF (BUS) page
SEND/PAN (INPUT) page
SEND/PAN (BUS) page
NOTE
i
Tap a level while pressing the HOME key on the top panel to
set that level to 0 dB.
i
Tap a PAN/BAL indicator while pressing the HOME key to set
the tapped pan/balance setting to center (C).
1
button
Tap this button to return to the screen shown before the
SEND OVERVIEW Screen.
2
MODULE button
Tap this button to open the MODULE Screen for the selected
MAIN L/R Master module.
3
/ buttons
Tap these buttons to move left and right in order between
MIX 1–22, FX 1–4 and MAIN L/R buses to show and activate
them for operation.
116
TASCAM Sonicview 16/Sonicview 24
