10 – Recording and playback
Setting FADER LEVEL targets
1. Tap the FADER LEVEL target selection button to open a
target setting window.
2. Tap the L or R button in the target setting window to open
a target selection window.
3. Swipe the options up and down to select a target.
4. Tap the APPLY button to confirm the target.
The target selection window will close.
NOTE
If a stereo module is set, the module for the other side will be
set automatically.
PLAYBACK OUT ASSIGN Screen
1
Page selection buttons
o
These show the names of the input modules to which the
player outputs are assigned. “No assign” is shown when no
player output is assigned.
o
Tap these buttons to switch the page shown.
2
Input module selection buttons
o
This shows the player output assignments.
Button for input module that does not
have any input assigned
Button for input module that has a
player output assigned
Button for input module that already
has a different input signal assigned
o
Tap these buttons to select input modules for player
output assignment. Multiple input modules can be
selected at the same time.
TASCAM Sonicview 16/Sonicview 24
157
