Tascam Sonicview 16, Справочное руководство

Страница: 113 / 188

7 – Other module parameter setting screens
7
SEND levels
o
This shows a list of setting states for SEND levels from the
CH 1–40, ST IN 1–2 and FX RTN 1–4 modules to the MIX
1–22 buses.
o
When a selection frame is shown, use corresponding LCD
knobs (lit orange) to adjust SEND levels.
Range: - ∞ dB - +10 dB (default: - ∞ dB)
8
MIX MASTER LEVEL
This adjusts the FADER level (bus master level) for the
selected MIX 1–22 bus.
Range: - ∞ dB - +10 dB (default: 0.0 dB)
When the selection frame is shown, turn LCD knob 8 (lit blue)
to adjust it.
9
SEND levels
o
This shows a list of setting states for SEND levels from the
MIX 1–22 and MAIN L/R Master modules to the MIX 1–22
buses.
o
When a selection frame is shown, use corresponding LCD
knobs (lit orange) to adjust SEND levels.
Range: - ∞ dB - +10 dB (default: - ∞ dB)
NOTE
A SEND level for the same bus as the selected bus shown in
the module name area (
4
) is not shown.
0
ON/OFF buttons
o
This shows a list of assignment ON/OFF states from the CH
1–40, ST IN 1–2 and FX RTN 1–4 modules to the MIX 1–22
buses.
o
Tap these buttons to switch on/off assignments to MIX
1–22 buses. (Default: ON)
When ON, buttons will be highlighted.
q
ON/OFF buttons
o
This shows a list of assignment ON/OFF states from the
MIX 1–22 and MAIN L/R Master modules to the MIX 1–22
buses.
o
Tap these buttons to switch on/off assignments to MIX
1–22 buses. (Default: OFF)
When ON, buttons will be highlighted.
NOTE
An assignment button for the same bus as the selected bus
shown in the module name area (
4
) is not shown.
w
PRE/POST buttons
o
This shows a list of settings for send positions from the CH
1–40, ST IN 1–2 and FX RTN 1–4 modules to the MIX 1–22
buses.
o
Tap these buttons to switch settings for send positions to
MIX 1–22 buses. (See “15 - Block diagram” on page 175.)
Display Explanation
PRE Pre-fader
POST (default) Post-fader
Tap the buttons to switch their send positions.
e
PAN/BAL for CH 1–40, ST IN 1–2 and FX RTN 1–4
modules
o
This shows a list of setting states for pan/balance from
the CH 1–40, ST IN 1–2 and FX RTN 1–4 modules to the
selected MIX 1–22 buses.
o
When a selection frame is shown, use corresponding LCD
knobs (lit yellow) to adjust the pan/balance.
Range: L100 – C – R100 (default: C)
NOTE
For buses that have the PAN LINK setting on, the SEND
PAN parameters appear dim and cannot be operated. They
are linked to the PAN/BAL settings of the corresponding
modules.
r
MIX 1–22 module PAN/BAL
o
This shows a list of setting states for pan/balance from the
MIX 1–22 modules to the selected MIX 1–22 bus.
o
When a selection frame is shown, use corresponding LCD
knobs (lit yellow) to adjust the pan/balance.
Range: L100 – C – R100 (default: C)
NOTE
For buses that have the PAN LINK setting on, the SEND
PAN parameters appear dim and cannot be operated. They
are linked to the PAN/BAL settings of the corresponding
modules.
TASCAM Sonicview 16/Sonicview 24
113