Tascam Sonicview 16, Справочное руководство

Страница: 74 / 188

5 – Routing
INSERT RETURN PORT SELECT
screen
Set INSERT RETURN signal input ports for CH 1–40, MIX 1–22 and
MAIN L/R Master modules on this screen.
Tap the RETURN button on the MODULE (OVERVIEW) Screen of
these modules to open this screen. (See “Insert input and output
routing” on page 67.)
1
LOCK/UNLOCK button
o
This button locks/unlocks routing setting change
operations for the unit. This is always locked at the time of
start up.
o
When set to “LOCK”, tapping the input source selection
button (
3
) will not change settings.
o
When set to “LOCK”, tap this button to open a confirmation
message. Tap the UNLOCK button to close the message
and set it to “UNLOCK”. Tapping the CANCEL button on
the confirmation message will close it and maintain the
locked state.
o
Tap this button when set to “UNLOCK” to switch it to
“LOCK”.
NOTE
The LOCK/UNLOCK button (
1
) setting is shared by the
following routing setting screens.
i
MODULE (INPUT) Screen
i
MODULE (OUTPUT) Screen
i
INPUT SOURCE SELECT Screen
i
OUTPUT PORT SELECT Screen
i
DIRECT OUT PORT SELECT Screen
i
INSERT SEND PORT SELECT Screen
i
INSERT RETURN PORT SELECT Screen
2
Input source group page switches
o
These show input source group page names.
o
Tap a page name to switch to the page with the
corresponding input source group. The name of the
selected page will be highlighted. An * will appear next to
the name of the page that the selected input source is on.
Page name Contents
SLOT 1
Select the inputs of the expansion
card installed in SLOT 1.
SLOT 2
Select the inputs of the expansion
card installed in SLOT 2.
3
Input source selection buttons
When the LOCK/UNLOCK button (
1
) is set to “UNLOCK”, tap
these buttons to select input sources.
The selected button will be highlighted.
Buttons that cannot be used will appear dark gray.
If a button that cannot be used is selected, it will appear dark
blue.
4
Scroll knob and scrollbar
These appear when all selectable options cannot be shown
on the display at the same time.
Drag the display to scroll the screen. The screen can also
be scrolled by swiping up and down on the input source
selection button (
3
) area as well as by turning LCD knob 8.
OUTPUT PORT SELECT screen
Set output ports for MIX 1–22 and MAIN L/R Master modules on
this screen.
Tap the OUTPUT button on the MODULE (OVERVIEW) Screen or
the Others button on the MODULE (OUTPUT) Screen of these
modules to open this screen. (See “Output routing” on page
68.)
74
TASCAM Sonicview 16/Sonicview 24