7 – Other module parameter setting screens
Mute Group Master page
1
Mute Group names
o
These show Mute Group names and user-defined Mute
Group names.
o
Tap these areas to open the MODULE NAME Screen
where the user module name and set module color can
be changed for the selected Mute Group. (See “MODULE
2
Mute Group assignment list
This list shows the names of modules that have been
assigned to mute groups.
3
MUTE buttons
These are Mute Group Master MUTE buttons. (Default: OFF)
Tap these buttons to turn them on and off.
When on, these buttons will appear highlighted and the
modules assigned to those Mute Groups will be muted.
In this case, the MUTE keys will blink for modules muted as
part of a mute group.
NOTE
Using the User Defined Control function, the Mute Group
function can also be operated with USER KEYS, FOOTSWITCH
and GPIO-IN controls. (See “USER DEFINED CONTROLS screen”
on page 38.)
The Mute Group MUTE function is assigned to the following
by default on the User Key and GPIO-IN pages.
i
USER KEY 1-4 (Mute Group 1-4)
i
GPIO-IN 1-5 (Mute Group 1-5)
MODULE NAME screen
The following settings can be made on this screen.
o
The user module names that are shown on screens can be set
and edited.
o
The set module name background colors shown on screens
as well as the lit colors of channel color bars can be changed.
o
Module icons shown on channel screens can be set.
o
Mute Group user module names can be set and edited. Set
Mute Group module colors can be changed.
CH 1 MODULE NAME Screen
DCA 1 MODULE NAME Screen
Mute Group MODULE NAME Screen
122
TASCAM Sonicview 16/Sonicview 24
