6 – Modules
Setting digital trim values in batches
1. Tap the D.TRIM knob indicator to open a window where
digital trim values can be set in batches.
2. Swipe the options up and down to select the modules to
include in batch setting of digital trim values.
Selections can also be changed by turning the LCD Knobs
4–6 with the same colors.
3. Use the LCD knob 3, which is lit red, to adjust the trim level.
4. Tap the APPLY button to open a setting confirmation
window.
5. Tap the OK button to set multiple digital trim values at the
same time.
This will return to the MODULE (INPUT) Screen.
MODULE (FX) Screen
Make effect settings on the MODULE (FX) Screen of the FX RTN
1–4 modules.
Tap the FX area on the Home Screen when the selection frame is
shown to open this screen.
FX RTN 1–4 module with PLATE REVERB
FX RTN 1–4 module with DELAY LCR
1
FX TYPE button
Tap this button to open the effect type selection window for
the selected module.
Tap a button to select an effect type.
Selecting will close the selection window.
90
TASCAM Sonicview 16/Sonicview 24
