
GUI Reference
R&S
®
ZNA
493
User Manual 1178.6462.02 ─ 12
Remote command:
SOURce<Ch>:POWer<PhyPt>:CORRection:TCOefficient[:STATe]
SOURce<Ch>:POWer<PhyPt>:CORRection:TCOefficient:CALibration
Two Port Config...
Opens the "Two Port Configuration" dialog that allows you to define the transmission
coefficients of the additional two-port device. See
"Two Port Configuration Dialog"
The button is disabled if "No Coefficients" is active. However, once you have config-
ured the two-port device, you can disable it without losing its configuration.
Two Port Configuration Dialog
The "Two Port Configuration" dialog defines the transmission characteristics of an
additional two-port in the calibrated frequency range.
Access:
Power Meter Transmission Coefficients Dialog
> "Two Port Config..."
Frequency / Transm. Coefficients: Insert, Delete, Delete All
The required two-port information is a list of transmission coefficients at different fre-
quency values (power loss list). The buttons in the dialog provide different ways of cre-
ating and modifying the list. Use "Insert", "Delete", "Delete All" to edit the list manually.
In a power, time or CW mode sweep, one point at the fixed CW frequency is sufficient.
In a frequency sweep, it is possible to enter several coefficients to account for a fre-
quency-dependent attenuation. Transmission coefficients are interpolated between the
frequency points and extrapolated, if necessary.
If no transmission coefficient is defined at all, the R&S
ZNA assumes a 0
dB attenua-
tion across the entire frequency range. This assumption is equivalent to an ideal
through connection or selecting "No Coefficients" in the
Remote command:
SOURce<Ch>:POWer<PhyPt>:CORRection:TCOefficient:INSert<ListNo>
SOURce<Ch>:POWer<PhyPt>:CORRection:TCOefficient:DEFine<ListNo>
SOURce<Ch>:POWer<PhyPt>:CORRection:TCOefficient:COUNt?
Cal Softtool