manualshive.com logo in svg

Rohde & Schwarz 1332.4500.22, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz 1332.4500.22 Скачать руководство пользователя страница 1036

Command Reference

R&S

®

 ZNA

1036

User Manual 1178.6462.02 ─ 12

Tip:

*.s<n>p

 Touchstone files (<n> = 1, 2, 3, ...) are intended for a complete set of

<n>-port S-parameters. Data export fails if the active channel does not contain the full
set of <n>

2

 traces.

Setting parameters: 

<Channel>

Channel number in the active recall set. ALL means that a sepa-
rate file is created for each channel in the active recall set.

<TraceFile>

String parameter to specify the name and directory of the cre-
ated trace file. Several file formats for trace files are supported.
The file extensions 

*.s<n>p

, 

*.csvc

, and 

*.dat

 for Touch-

stone, ASCII, and Matlab files are mandatory. To generate a
multiport Touchstone file 

*.s2p

, 

*.s3p...

, the channel must

contain traces for the full set of S-parameters.   If no path is
specified the analyzer uses the

C:\Users\Public\Documents\Rohde-Schwarz\ZNA\
Traces

 directory.

<FormatInd>

FORMatted | UNFormatted
UNFormatted - unformatted data export specified by the second
optional parameter.
FORMatted - formatted data export (for 

*.csv

 and 

*.dat

 files

only).
If the first optional parameter is omitted, the command stores
unformatted data.

<Format>

COMPlex | LINPhase | LOGPhase
COMPlex - complex values (real and imaginary part)
LINPhase - linear magnitude and phase.
LOGPhase - dB-magnitude and phase.
If the second optional parameter is omitted, the command stores
complex data.

<DecSeparator>

POINt | COMMa
POINt - Decimal separator: point.
COMMa - Decimal separator: comma.
If the third optional parameter is omitted, points are used.

<FieldSeparator>

SEMicolon | COMMa | TABulator | SPACe
SEMicolon - Field separator: semicolon
COMMa - field separator: comma.
TABulator - field separator: tabulator.
SPACe - field separator: space.
If the third optional parameter is omitted, semicolons are used.

SCPI Command Reference

Содержание 1332.4500.22





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды