Rohde & Schwarz 1332.4500.22, Руководство пользователя

Страница: 301 / 1476

GUI Reference
R&S
®
ZNA
301 User Manual 1178.6462.02 ─ 12
Use Constant Cal Dly ← Mixer Delay
If checked, you can specify a constant calibration delay . Otherwise you can use the
"Variable Cal Dly" button to pick a CSV file with delay data for the reference mixer.
Remote command:
[SENSe<Ch>:]FREQuency:MDELay:CDMode
Constant Cal Dly/Variable Cal Dly ← Mixer Delay
If Use Constant Cal Dly is checked, you can enter a constant calibration delay. Other-
wise the button is labeled "Variable Cal Dly" and you can click on it to load delay data
for the reference mixer from a CSV file.
Remote command:
[SENSe<Ch>:]FREQuency:MDELay:CDELay
MMEMory:LOAD:MDAData
Mixer Dly Cal Active ← Mixer Delay
Activates or deactivates an available mixer delay calibration (performed using Mixer
Dly Cal ).
Remote command:
[SENSe<Ch>:]FREQuency:MDELay:CORRection[:STATe]
6.2.15.2 Two Tone Group Delay Setup Dialog
The "Two Tone Group Delay" dialog is an example of a Chapter 5.2.2.3, "Multi-channel
Setup Dialog" , on page 91. It allows you to prepare one or more channels for two-tone
group delay measurements (with or without embedded LO).
Access: Trace – [Meas] ("Mixer Params") > "Two Tone Group Dly" > "Setup Frequency
Converting DUT"
Meas Softtool