GUI Reference
R&S
®
ZNA
596
User Manual 1178.6462.02 ─ 12
A favorite is actually a path to the related recall set, i.e.
●
if the recall set is modified, then the modified recall set is loaded the next time the
favorite is selected
●
if the recall set is moved or deleted, the corresponding favorite is broken
The firmware can manage up to 6 favorites. New favorites are always created at the
topmost spare position in the favorites list. If the list is complete (i.e. if there are no
more spare positions), new favorites can only be added after existing ones were
removed.
Add Active Recall Set
Adds the active recall set to the list of favorites.
This button is only active if the current setup was loaded from or saved to a recall set.
Import
Opens a file browser that allows you to add an arbitrary recall set to the favorites list.
Remote command:
Favorites section
Select one of the active buttons to open the corresponding recall set.
Favorites combo-box / Remove
Use the "Favorites" combo-box to select the favorite to be removed from the list, then
select "Remove"
6.15.3
Print Tab
The buttons on the "Print" tab allow you to send the diagrams of the active setup to an
external printer, to a file or to the clipboard. Content and layout can be defined in the
.
Prints the diagrams using the current content, printer and page settings (see
ter 6.15.4, "Printer Setup Dialog"
Remote command:
The
HCOPy...
commands provide the printer settings; see
initiates printing.
File Print Softtool
