Chapter 6: Using the Web Interface
175
Special note for AES ciphers:
The EMX device's SSL/TLS-based protocols, including SMTP over
StartTLS, support AES 128- and 256-bit ciphers. The exact cipher to use
is negotiated between the EMX and the client (such as a web browser),
which is impacted by the cipher priority of the EMX and the client's
cipher availability/settings.
Tip: If intending to force the EMX to use a specific AES cipher, refer to
your client's user documentation for information on configuring AES
settings.
Changing SSH Settings
You can enable or disable the SSH access to the command line interface,
change the TCP port, or set a password or public key for login over the
SSH connection.
To change SSH settings:
1.
Choose Device Settings > Network Services > SSH.
2.
To enable or disable the SSH access, select or deselect the
checkbox.
3.
To use a different port, type a port number.
4.
Select one of the authentication methods.
Password authentication only: Enables the password-based login
only.
Public key authentication only: Enables the public key-based
login only.
Password and public key authentication: Enables both the
password- and public key-based login. This is the default.
5.
Click Save.
If the public key authentication is selected, you must enter a valid SSH
public key for each user profile to log in over the SSH connection. See
Creating Users
(on page 138).
Changing Telnet Settings
You can enable or disable the Telnet access to the command line
interface, or change the TCP port.
To change Telnet settings:
1.
Choose Device Settings > Network Services > Telnet.
2.
To enable the Telnet access, select the checkbox.
Содержание EMX2-111
