Raritan EMX2-111, Руководство пользователя

Страница: 447 / 565

Appendix B: Configuration or Firmware Upgrade with a USB Drive
435

The default value is
serial:1
, making the EMX search for its serial
number in the first column.

This option is used only if the "device_list" option has been set.
collect_diag

If this option is set to
true
, the diagnostic data of the EMX is
downloaded to the USB drive.

The filename of the diagnostic data written into the USB drive varies,
depending on the EMX firmware version:

Filename prior to version 3.0.0: diag_<unit-serial>.zip, where
<unit-serial> is the serial number of the EMX.

Filename as of version 3.0.0: diag_<unit-serial>.tgz

The EMX utters a short beep when writing the diagnostic data to the
USB drive.
factory_reset

Supported as of release 3.0.0.

If this option is set to
true
, the EMX will be reset to factory defaults.

If the device configuration will be updated at the same time, the
factory reset will be executed before updating the device
configuration.
bulk_config_restore

Supported as of release 3.1.0.

Specify the name of the bulk configuration file used to configure or
restore the EMX.
Note: See
Bulk Configuration
(on page 272) for instructions on
generating a bulk configuration file.

Additional configuration keys set via the config.txt file will be applied
after performing the bulk restore operation.

This option CANNOT be used with the option "full_config_restore."

If a firmware upgrade will be performed at the same time, you must
generate the bulk configuration file based on the NEW firmware
version instead of the current firmware version.
full_config_restore

Supported as of release 3.1.0.

Specify the name of the full configuration backup file used to restore
the EMX.
Note: See Backup and Restore of Device Settings (on page 274) for
instructions on generating the full configuration backup file.