Raritan EMX2-111, Руководство пользователя

Страница: 92 / 565

Chapter 5: Using the EMX
80
Numbers Components
3 Two buttons to configure the normal settings
of the built-in CC sensor channels.

The upper button is for CC2.

The lower button is for CC1.
To adjust the normal settings:

To set to Normally Closed (N.C), press the
button to turn it down.

To set to Normally Open (N.O), press the
button to turn it up.
Tip: Alternatively, third-party CC switches can be connected to Raritan's
DPX-CC2-TR or DX sensor package, which is then connected to a
SENSOR port on the EMX. For sensor information, refer to the
Environmental Sensors Guide or Online Help on the Raritan's website's
Support page (
Connecting Contact Closure Sensors to EMX2-888
Follow the steps below to connect contact closure detectors/switches to
the built-in contact closure sensor terminals on your EMX2-888.
Note: For connecting detectors/switches to old EMX2-888 with
spring-loaded contact closure sensor terminals, see
Connecting
Contact Closure Sensors to OLD EMX2-888
(on page 534).
The built-in contact closure sensor terminals comprise two parts as
shown below.
A
Contact closure sensor panel
B
Removable terminal module