Raritan EMX2-111, Руководство пользователя

Страница: 165 / 565

Chapter 6: Using the Web Interface
153
Field Description

Auto: System determines the optimum LAN
speed through auto-negotiation.

10 MBit/s: Speed is always 10 Mbps.

100 MBit/s: Speed is always 100 Mbps.
Duplex Select a duplex mode.

Auto: The EMX selects the optimum
transmission mode through auto-negotiation.

Full: Data is transmitted in both directions
simultaneously.

Half: Data is transmitted in one direction (to
or from the EMX device) at a time.
Current State
Show the LAN's current status, including the
current speed and duplex mode.
Note: Auto-negotiation is disabled after setting both the speed and
duplex settings of the EMX to NON-Auto values, which may result in a
duplex mismatch.
Wireless Network Settings
If the device's cascading mode is set to 'Bridging' or its role is set to
'Slave' in the port forwarding mode, the wireless settings will be disabled.
See
Setting the Cascading Mode (on page 162).
By default the wireless interface is disabled. You should enable it if
wireless networking is wanted.
Interface Settings:
Field/setting Description
Enable Interface Enable or disable the wireless interface.
When disabled, the wireless networking fails.
Hardware State Check this field to ensure that the EMX device has
detected a wireless USB LAN adapter. If not,
verify whether the USB LAN adapter is firmly
connected or whether it is supported.
SSID
Type the name of the wireless access point (AP)
Force AP BSSID If the BSSID is available, select this checkbox