Raritan EMX2-111, Руководство пользователя

Страница: 41 / 565

Chapter 4: Connecting External Equipment (Optional)
29
EMX2-111 Connection
The FEATURE port of EMX2-111 supports 5 volts of power only, which is
insufficient for connecting the latest generation (G3) of asset strips.
Therefore, the use of a Raritan X cable is required for EMX2-111 to
connect current asset strips, or EMX2-111 cannot detect them.
To connect a regular asset strip assembly to EMX2-111:
1. Assemble regular asset strips according to your needs. See
Combining Regular Asset Strips (on page 26).
2. Affix the adhesive end of an asset tag to each IT device through the
tag's tape. See
Introduction to Asset Tags (on page 28).
3. Plug the connector of each asset tag into the corresponding tag port
on the asset strip.
Note: If an IT device occupies more than one rack unit in the rack, it
is suggested to plug the asset tag into the lowest tag port. For
example, if a device occupies the 5th and 6th rack units, plug the
asset tag into the tag port matches the 5th rack unit.
4. Connect the MASTER asset strip's RJ-45 connector to the male
RJ-45 connector at the longer end of the Raritan X cable.
5. Plug the male RJ-12 phone connector at the shorter end of the X
cable into the RJ-12 SENSOR port on the EMX2-111 device.