Raritan EMX2-111, Руководство пользователя

Страница: 334 / 565

Chapter 8: Using the Command Line Interface
322
Setting Data Logging Measurements Per Entry
This command defines the number of measurements accumulated per
log entry.
config:# emd measurementsPerLogEntry <number>
Variables:

<number> is an integer between 1 and 600. The default is 60
samples per log entry.
For more information, see
Setting Data Logging
(on page 245).
Specifying the Device Altitude
This command specifies your EMX device's altitude above sea level (in
meters). You must specify the EMX device's altitude above sea level if a
Raritan's DPX differential air pressure sensor is attached. This is
because the device's altitude is associated with the altitude correction
factor. See
Altitude Correction Factors
(on page 532).
config:# emd deviceAltitude <altitude>
Variables:

<altitude> is an integer between 1 and 3000 meters.
Setting the Z Coordinate Format for Environmental Sensors
This command enables or disables the use of rack units for specifying
the height (Z coordinate) of environmental sensors.
config:# emd externalSensorsZCoordinateFormat <option>
Variables:

<option> is one of the options:
rackUnits or freeForm.
Option Description
rackUnits The height of the Z coordinate is measured in
standard rack units. When this is selected, you
can type a numeric value in the rack unit to
describe the Z coordinate of any environmental
sensors or actuators.