Raritan EMX2-111, Руководство пользователя

Страница: 245 / 565

Chapter 6: Using the Web Interface
233

No script is available if you have not created or loaded it into the
EMX.
5. To apply different arguments than the default, do the following. Note
that the newly-added arguments will override this script's default
arguments.
a. Click .
b. Type the key and value.
c. Repeat the same steps to enter more arguments as needed.

To remove any existing argument, click adjacent to
it.
Switch LHX/SHX
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will
be available. See
Miscellaneous
(on page 260).
Use this action to switch the LHX/SHX on or off when, for example,
temperature thresholds are reached.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Switch LHX/SHX" from the Action list.
3. In the Operation field, select Turn LHX/SHX On or Turn LHX/SHX Off.
4. In the Available LHX/SHX field, select the LHX/SHX device to be
turned on or off. To select all available LHX/SHX devices, click Select
All.
To remove any LHX/SHX device from the Selected LHX/SHX field,
click that device's . To remove all devices, click Deselect All.
Switch Peripheral Actuator
If you have any actuator connected to the EMX, you can set up the EMX so
it automatically turns on or off the system controlled by the actuator
when a specific event occurs.
Note: For information on connecting actuators, see
DX Sensor
Packages
(on page 51).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Switch peripheral actuator" from the Action list.