Raritan EMX2-111, Руководство пользователя

Страница: 246 / 565

Chapter 6: Using the Web Interface
234
3. In the Operation field, select an operation for the selected
actuator(s).

Turn On: Turns on the selected actuator(s).

Turn Off: Turns off the selected actuator(s).
4. To select the actuator(s) where this action will be applied, select
them one by one from the Available Actuators list.

To add all actuators, click Select All.
5. To remove any selected actuator from the Selected Actuators field,
click that actuator's .

To remove all actuators, click Deselect All.
Syslog Message
Use this action to automatically forward event messages to the specified
syslog server. Determine the syslog transmission mechanism you prefer
when setting it up - UDP, TCP or TLS over TCP.
The EMX may or may not detect the syslog message transmission failure.
If yes, it will log this syslog failure as well as the failure reason in the
event log. See
Viewing or Clearing the Local Event Log
(on page 268).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Syslog message" from the Action list.
3. In the Syslog Server field, specify the IP address to which the syslog
is forwarded.
4. In the Transport Protocol field, select one of the syslog protocols:
TCP, UDP or TCP+TLS. The default is UDP.
Transport
protocols Next steps
UDP

In the UDP Port field, type an appropriate port number. Default is 514.

Select the "Legacy BSD Syslog Protocol" checkbox if applicable.
TCP NO TLS certificate is required. Type an appropriate port number in the TCP Port field.