Raritan EMX2-111, Руководство пользователя

Страница: 435 / 565

Chapter 9: Using SCP Commands
423
SCP command example:
scp emx-ecx-030200-42396.bin
admin@192.168.87.50:/fwupdate
Tip: The PSCP works in a similar way to the SCP command --
pscp <firmware file> <user name>@<device ip>:/fwupdate
Bulk Configuration via SCP
Like performing bulk configuration via the web interface, there are two
steps with the bulk configuration using the SCP commands:
a. Save a configuration from a source EMX.
b. Copy the configuration file to one or multiple destination EMX.
For detailed information on the bulk configuration requirements, see
Bulk Configuration
(on page 272).
To save the configuration via SCP:
1. Type the following SCP command and press Enter.
scp <user name>@<device ip>:/bulk_config.xml

<user name> is the "admin" or any user profile with the
administrator privileges.

<device ip> is the IP address of the EMX whose configuration you
want to save.
2. Type the user password when prompted.
3. The system saves the configuration from the EMX to a file named
"bulk_config.xml."
To copy the configuration via SCP:
1. Type the following SCP command and press Enter.
scp bulk_config.xml <user name>@<device
ip>:/bulk_restore

<user name> is the "admin" or any user profile with the
administrator privileges.

<device ip> is the IP address of the EMX whose configuration you
want to copy.
2. Type the user password when prompted.