Raritan EMX2-111, Руководство пользователя

Страница: 25 / 565

Chapter 3: Initial Installation and Configuration
13
EMX2-888:
To use the command line interface (CLI) for configuration, establish an
RS-232 or USB connection.
To use a web browser for configuration, make a network connection to
the computer. The EMX is automatically configured with the following
link-local addressing in any network without DHCP available:

https://169.254.x.x (where x is a number)

https://pdu.local
Establish one of the following connections to a computer.
Serial connection for "DB9" RS-232 connector on EMX:
1. Connect one end of the null-modem DB9 cable to the male "DB9"
RS-232 port labeled CONSOLE / MODEM on the EMX.
2. Connect the other end to your computer's RS-232 port (COM).
3. Perform
Initial Network Configuration via CLI
(on page 15).
USB connection:
1. A USB-to-serial driver is required in Windows
®
. Install this driver
before connecting the USB cable. See
Installing the USB-to-Serial
Driver (Optional)
(on page 14).
2. Connect a USB cable between the EMX device's USB-B port and a
computer's USB-A port.
3. Perform
Initial Network Configuration via CLI
(on page 15).
Note: Not all serial-to-USB converters work properly with the EMX
so Raritan does not introduce the use of such converters.
Direct network connection:
1. Connect one end of a standard network patch cable to the
ETHERNET port of the EMX.
2. Connect the other end to a computer's Ethernet port.
3. On the connected computer, launch a web browser to access the
EMX, using either link-local addressing:
pdu.local or 169.254.x.x. See
Login
(on page 87).