Raritan EMX2-111, Руководство пользователя

Страница: 143 / 565

Chapter 6: Using the Web Interface
131
For the Feature Port's mode configuration, see
Feature Port(s)
(on page
119).
To view the LHX/SHX device state:
The Operation State field indicates whether the device is operating fine,
and the Switch State field indicates its power status.
If the device does not operate properly, such as some sensor failure, it
shows "critical" and the symbol .
To turn on or off the LHX/SHX device:
1. Click the desired power-control button on the top-right corner.
: Power ON.
: Power OFF.
2. Confirm the operation on the confirmation message.
To configure LHX/SHX settings:
1. Click Edit Settings.
2. Configure the settings as needed.

Provide a customized name.

Specify the desired air outlet setpoint temperature.

Specify the default fan speed.
3. Click Save.
To view all sensor data and configure thresholds:
1. Locate the Sensors section, which lists all air outlet/inlet
temperatures and fan speeds, and indicates the door closed/open
status of the LHX/SHX device.
2. To set the thresholds for any temperature or fan speed sensor
implemented on the LHX/SHX device:
a. Click the desired sensor.
b. Click Edit Thresholds.
c. Enable and set the desired thresholds and deassertion
hysteresis.
Note that assertion timeout is NOT available on LHX/SHX.
d. Click Save.
3. After thresholds are enabled, sensors may be highlighted in yellow
or red if they enter the warning or critical range. See
Yellow- or
Red-Highlighted Sensors (on page 106).