Raritan EMX2-111, Руководство пользователя

Страница: 297 / 565

Chapter 7: Using SNMP
285
To enable SNMP notifications:
1. Choose Device Settings > Network Services > SNMP.
2. In the SNMP Notifications section, enable the SNMP notification
feature, and configure related fields. For details, refer to:

SNMPv2c Notifications (on page 285)

SNMPv3 Notifications
(on page 286)
Note: Any changes made to the 'SNMP Notifications' section on the
SNMP page will update the settings of the System SNMP Notification
Action, and vice versa. See
Available Actions
(on page 219).
SNMPv2c Notifications
1. Choose Device Settings > Network Services > SNMP.
2. In the SNMP Agent, make sure the Enable SNMP v1/v2c checkbox is
selected.
3. In the SNMP Notifications section, make sure the Enable SNMP
Notifications checkbox is selected.
4. Select SNMPv2c Trap or SNMPv2c Inform as the notification type.
5. Type values in the following fields.
Field Description
Timeout The interval of time, in seconds, after which a new
inform communication is resent if the first is not
received.

For example, resend a new inform
communication once every 3 seconds.
Number of Retries The number of times you want to resend the inform
communication if it fails.

For example, inform communications are
resent up to 5 times when the initial
communication fails.
Host The IP address of the device(s) you want to access.
This is the address to which notifications are sent
by the SNMP agent.
You can specify up to 3 SNMP destinations.
Port The port number used to access the device(s).
Community The SNMP community string to access the
device(s). The community is the group representing
the EMX and all SNMP management stations.