Raritan EMX2-111, Руководство пользователя

Страница: 116 / 565

Chapter 6: Using the Web Interface
104
To release or manage sensors/actuators:
When the total of managed sensors/actuators reaches the maximum (32),
you cannot manage additional ones. The only way to manage any
sensor/actuator is to release or replace any managed ones. To replace a
managed sensor/actuator, see
Managing One Sensor or Actuator (on
page 112). To release any one, follow this procedure.
1. Click to make checkboxes appear in front of
sensors/actuators.
Tip: To perform the desired action on only one sensor/actuator,
simply click that sensor/actuator without making the checkboxes
appear.
2. Select multiple sensors/actuators.

To release sensors/actuators, you must only select "managed"
ones. See Sensor/Actuator States (on page 108).

To manage sensors/actuators, you must only select
"unmanaged" ones.

To select ALL sensors/actuators, select the topmost checkbox in
the header row.
3. To release selected ones, click > Release.
To manage them, click > Manage.

The management action triggers a "Manage peripheral device"
dialog. Simply click Manage if you are managing multiple
sensors/actuators.

If you are managing only one sensor/actuator, you can choose to
assign an ID number by selecting "Manually select a sensor
number." See
Managing One Sensor or Actuator (on page 112).
4. Now released sensors/actuators become "unmanaged."