Raritan EMX2-111, Руководство пользователя

Страница: 86 / 565

Chapter 5: Using the EMX
74
Section Example information
The word "MASTER" indicates the EMX is the master
device in a cascading configuration.
For a slave device, it shows "SLAVE" instead.
Note: As of release 3.3.10, the "MASTER/SLAVE"
information is no longer available in the bridging mode,
but remains available in the port forwarding mode.
"ASSET" means that the LCD display enters the Asset
Strip mode.
To display the asset management information:
1. Press the MODE button until the EMX enters the Asset Strip mode,
as indicated by "ASSET" to the right of the LCD.
2. Press the Up or Down button until the desired FEATURE port
number is displayed at the top of the LCD display.
If no asset sensor is physically connected to the selected FEATURE
port, the term "nA" appears.
3. Press the FUNC button. When a blinking double-arrow symbol
appears to the left of the LCD display, press the Up or Down button
to select the desired rack unit on the asset strip. The rack unit
number appears in the middle of the LCD display.
Note: Press and hold the Up or Down button for at least two (2)
seconds to quickly move through several items at once.

If the word "ALARM" appears below the rack unit number, it
means no asset tag is physically connected to that rack unit.

If the word "ALARM" does NOT appear, it means a connected
asset tag is detected on the rack unit.