Raritan EMX2-111, Руководство пользователя

Страница: 192 / 565

Chapter 6: Using the Web Interface
180
Note: Valid IPv4 addresses range from 0.0.0.0 through
255.255.255.255.
To configure IPv4 access control rules:
1. Choose Device Settings > Security > IP Access Control.
2. Select the Enable IPv4 Access Control checkbox to enable IPv4
access control rules.
3. Determine the IPv4 default policy.

Accept: Accepts traffic from all IPv4 addresses.

Drop: Discards traffic from all IPv4 addresses, without sending
any failure notification to the source host.

Reject: Discards traffic from all IPv4 addresses, and an ICMP
message is sent to the source host for failure notification.
4. Go to the Inbound Rules section or the Outbound Rules section
according to your needs.

Inbound rules control the data sent to the EMX.

Outbound rules control the data sent from the EMX.
5. Create rules. See the tables for different operations.
ADD a rule to the end of the list

Click Append.

Type an IP address and subnet mask in the IP/Mask field.

Select an option in the Policy field.

Accept: Accepts traffic from/to the specified IP address(es).

Drop: Discards traffic from/to the specified IP address(es), without sending any
failure notification to the source or destination host.

Reject: Discards traffic from/to the specified IP address(es), and an ICMP
message is sent to the source or destination host for failure notification.
INSERT a rule between two rules

Select the rule above which you want to insert a new rule. For example, to insert a
rule between rules #3 and #4, select #4.

Click Insert Above.

Type an IP address and subnet mask in the IP/Mask field.

Select Accept, Drop or Reject in the Policy field. See the above for their descriptions.
The system automatically numbers the rule.
6. When finished, the rules are listed.