Raritan EMX2-111, Руководство пользователя

Страница: 117 / 565

Chapter 6: Using the Web Interface
105
Managed ones show one of the managed states.
To configure default threshold settings:
Note that any changes made to default threshold settings not only
re-determine the initial threshold values applying to newly-added
sensors but also the threshold values of the already-managed sensors
where default thresholds are being used. See
Individual
Sensor/Actuator Pages (on page 114).
1. Click > Default Threshold Setup.
2. Click the desired sensor type (required), and then click Edit
Thresholds.
3. Make changes as needed.

To enable any threshold, select the corresponding checkbox.

Type a new value in the accompanying text box.
For concepts of thresholds, deassertion hysteresis and assertion
timeout, see
Sensor Threshold Settings (on page 523).
4. Click Save.
Tip: To customize the threshold settings on a per-sensor basis, go to
Individual Sensor/Actuator Pages (on page 114).
To turn on or off any actuator(s):
1. Select one or multiple actuators which are in the same status - on or
off.

To select multiple actuators, click to make checkboxes
appear and then select desired actuators.
2. Click the desired button.