Nortel Modular ICS 7.1, Инструкция по установке

Страница: 449 / 700

System prgrming /
449
N0130943 02 Modular ICS 7.1 Installer Guide
Use
≠
and
CHANGE
to select the setting:
Intrnl
,
Extrnl
, or
None
.
Intrnl/Extrnl#
Enter the internal or external number that the system will
automatically dial when someone enters the direct-dial digit.
Use
≠
,
CHANGE
, and the dialpad to enter the
telephone number.
The default number for the direct-dial telephone is
221
, on the
default three-digit DN system.
Line selection
If you assign an external number as a direct-dial telephone,
you must indicate which line to use for the call.
Use
‘
,
CHANGE
, and the dialpad to select the line for
the external number.
Tips -
There is just one direct-dial digit for the entire
system.
The Norstar system cannot verify that the number you assign
as an external direct-dial telephone is valid. Check the
number before assigning it, then call the direct-dial telephone
after you’ve assigned it to test it.
You cannot forward calls to any direct-dial telephone that is
outside your Norstar system. For more information, refer to
the Modular ICS 7.1 System Coordinator Guide.