manualshive.com logo in svg

Nortel Modular ICS 7.1, Инструкция по установке, Страница: 245 / 700

Поделиться
Скачать
Nortel Modular ICS 7.1 Скачать руководство пользователя страница 245

Inserting a cartridge / 

245

N0130943  02

Modular ICS 7.1 Installer Guide

Two-port Expansion Cartridge

Tips - 

On a midi system, ports 3 and 4 can be used for 

Trunk Modules or Station Modules. In this case, connect Trunk 
Modules beginning at the top (port 4). Connect Station 
Modules beginning at the bottom (port 3).

On a maxi system, ports 3 through 8 can be used for Trunk 
Modules or Station Modules. In this case, Trunk Modules 
should be connected beginning at the top (port 8) and working 
down. Station Modules should be connected beginning at the 
bottom (port 3) and working up.

On a fully expanded 14-port (mega) system, connect Trunk 
Modules beginning at the top (port 8) and working down. 
Station Modules would be connected beginning at the bottom 
(port 3) and working up. Trunk Modules cannot be connected 
to the Expansion Cartridge connected in slot 1.

When no more Station Modules can be added to the Expansion 
Cartridge in slot 2, connect additional Station Modules to the 
Expansion Cartridge in slot 1, beginning at the bottom (port 9) 
and working up.

ICS (modules 1 and 2)

TM4

SM3

ICS (modules 1 and 2)

TM4

SM3

Содержание Modular ICS 7.1





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов