Nortel Modular ICS 7.1, Инструкция по установке

Страница: 346 / 700

346 / Terminals&Sets
Modular ICS 7.1 Installer Guide N0130943 02
Priority call Select whether to allow this telephone to
interrupt calls or to override Do Not
Disturb at another telephone. Y, N
Hotline Select whether a telephone number will
be dialed automatically when a user lifts
the receiver or presses the handsfree
button. Intrnl, Extrnl,
None
Intrnl # Appears if Hotline is Intrnl Enter DN, None
Extrnl # Appears if Hotline is Extrnl None ,
<up to 24 digits>
<Extrnl>
facility
choice Appears if Hotline is Extrnl and number is
specified.
Use routing tabl
option routes numbers
through the Routing Table.
Target lines cannot be used as the
facility.
Use Prime line
Use line:
Pool code:
Use Routing tabl
Aux. ringer Select whether an auxiliary ringer (if
installed) will ring for incoming calls at
this telephone. Y, N
Allow redirect Select whether to allow this telephone to
redirect its lines. Y, N
Redirect ring Select whether a telephone rings briefly
when a call on one of its lines is
redirected by the Line Redirection feature
(
≤°›
).
Y , N
ATA settings
ATA ans timer Select the length of delay between the
last digit you dial and when the ATA
device is ready to receive DTMF tone.
To accommodate the device attached to
the ATA, you may need to change the
delay. If a modem or fax machine is
attached to the ATA, you will want to
keep the delay short. If a call to a fax
machine or modem cannot be
connected, try shortening the delay. If an
individual is dialing the number for a fax
machine or modem, you may want to
make the delay a little longer.
3, 5, 7 , 10
Setting Description Options