Nortel Modular ICS 7.1, Инструкция по установке

Страница: 539 / 700

Module status /
539
N0130943 02 Modular ICS 7.1 Installer Guide
Checking the state of a cartridge
Installer password required
Start from the display that shows the number of lines
connected to the Trunk Cartridge you chose, for example,
Card 1: 4 lines
.
1. Press
STATE
.
The display shows the state of the cartridge. Some
examples of this display are shown in the previous table.
2. Press
‘
or
“
to check the Trunk
Cartridges connected to the other Trunk Modules.
3. If required, you can disable or enable the cartridge. Refer
to Disabling a module or its cartridges on page 539 or
Enabling a module or its cartridge on page 540.
4. Press
OK
to return to the display showing how many lines
are connected to the Trunk Cartridge.
Disabling a module or its cartridges
Installer password required
From the display showing the state of the module or cartridge:
1. Press
DISABLE
.
Disable at once?
displays.
2. Press
YES
.
The system disables the module or cartridge in one minute.
If the status is idle, the system disables the module or
cartridge immediately.
Use Page feature prior to disabling.
Use the Page feature to inform people that you
are about to disable a module. Mention that they
may experience delays in the performance of
their devices.