manualshive.com logo in svg

Nortel Modular ICS 7.1, Инструкция по установке, Страница: 460 / 700

Поделиться
Скачать
Nortel Modular ICS 7.1 Скачать руководство пользователя страница 460

460

 / System prgrming

Modular ICS 7.1 Installer Guide

N0130943  02

Auto DN

Installer password required

For calls answered without DISA, no password is required to 
access the Norstar system. The Class of Service (COS) that 
applies to the call is determined by the COS for the trunk on 
which the user is calling.

1. Use 

CHANGE

 

and the dialpad to enter the digits to be 

received from the auto-answer trunk. 

2. Press 

CLR

 to set the Auto DN back to 

None

.

DISA DN

Installer password required

For calls answered with DISA, the system presents a stuttered 
dial tone to prompt a caller to enter a valid password. The 
Class of Service (COS) that applies to the call is determined by 
this COS password. 

Once a remote user is on the Norstar system, the DISA DN can 
be used to change the existing Class of Service. This gives you 
greater flexibility when you create access privileges. For 
example, you may want to have a shared DN for remote access 
and separate COS passwords with different dialing out 
privileges for individuals.

Use 

CHANGE

 and the dialpad to enter the digits to be received 

from the auto-answer trunk. 

Press

 CLR

 to set the 

DISA DN

 to 

None

.

Tips - 

The length of the Auto DN is the same as the 

Rec'd # length

 specified in

 

System prgming

.The Auto DN 

is cleared if the Received number length is changed.

The Auto DN cannot be the same as a line pool access code or 
a destination code.

Содержание Modular ICS 7.1





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов