Nortel Modular ICS 7.1, Инструкция по установке

Страница: 438 / 700

438
/ System prgrming
Modular ICS 7.1 Installer Guide N0130943 02
1. Press
YES
and use the dialpad to enter the space allocation
for the Call log at each telephone.
You must use a three-digit number (for example, 020 to
give each set 20 spaces).
2. Press
YES
to accept the settings and end programming. The
system automatically reallocates Log space.
Press
NO
to keep existing settings.
Host delay
Host delay allows you to assign the delay between the moment
an outgoing line is selected to make an external call, for
example, by lifting the receiver off the telephone, and the
moment that Norstar sends dialed digits or codes on the line.
Tips -
Use this heading only if you want to allocate an
equal amount of log space to all the telephones in your system.
If you want to assign specific log space to individual
telephones, see the information under
Terminals&Sets
in the
Modular ICS 7.1 System Coordinator Guide.
Reallocating Call log space may destroy Call log data at
telephones that lose space.
There are 600 Call log spaces available in the system. There
are no spaces allocated by default.
Changing the space allocation using Log Defaults defines the
log space available to all telephones in the system. Any
remaining unassigned log space is available in a log pool, and
can be reallocated under
Terminals&Sets
in
Telco
features
.