Nortel Modular ICS 7.1, Инструкция по установке, Страница: 465 / 700

System prgrming /
465
N0130943 02 Modular ICS 7.1 Installer Guide
Rec’d # length
Installer password required
The Received number length setting allows you to change the
number of digits received on auto-answer trunks. These digits
are used to identify target lines, Auto DNs, and DISA DNs.
Press
CHANGE
to select the setting: 1, 2, 3 , 4, 5, 6, or 7. Then,
press
‘
to make the change.
DN length
Installer password required
This feature allows you to change the number of digits for all
DNs. The maximum length is seven. The default, and
minimum length, is
3 .
1. Press
CHANGE
to select the setting: 3 , 4, 5, 6, or 7.
2. Press
‘
to save the new DN length.
The display shows
Drop data calls?
.
3. Press
YES
to save the new DN length.
NO
restores the original value.
Tips -
The target line number (for example, line 052) and
the Received number for the target line (for example,
Rec'd #: 123
for line 052) are two different numbers.
Tips -
The Received number length may be the same as the
system DN length. However, network or central office
constraints may require you to set it to some other value.
Changing the Received number length causes all programmed
received digits to be cleared.