Nortel Modular ICS 7.1, Инструкция по установке

Страница: 459 / 700

System prgrming /
459
N0130943 02 Modular ICS 7.1 Installer Guide
External code
Installer password required
External code allows you to assign the external line access
code. This code is used to allow model 7000 and 7100 Digital
phones, analog telephones connected through analog trunks or
through Analog Terminal Adapters (ATA2), and Digital
Mobility phones, to access external lines.
Press
CHANGE
to select the setting:
0
to
9
, or
None
.
Direct-dial #
Installer password required
Direct-dial digit allows you to dial a single system-wide digit
to call a specific telephone, called a direct-dial telephone, such
as a receptionist’s station.
Press
CHANGE
to select the setting: 1 to 9,
None
, or 0 .
Tips -
The external line access code cannot conflict with:
• the Park prefix
• the direct-dial digit
• the first digit of a line pool access code
• the first digit of a DN
• the first digit of a destination code.
If DN length is changed, and the changed DNs conflict with the
Park prefix, the setting changes to None.
Tips -
Another direct-dial telephone, an extra-dial
telephone, can be assigned for each schedule in Services
programming.
The direct-dial digit cannot be the same as the first digit of:
• a DN
• a line pool access code
• the external line access code
• the Call Park prefix
• the first digit of a destination code
If DN length is changed, and the changed DNs conflict with the
Park prefix, the setting changes to None.