Nortel Modular ICS 7.1, Инструкция по установке

Страница: 401 / 700

Services /
401
N0130943 02 Modular ICS 7.1 Installer Guide
Setting up a route for long distance calling
Installer password required
An office may have leased lines or E&M trunks which make it
cheaper to call long distance.
The routing should take place automatically when the number
of the outgoing call begins with 1.
The first step is to build a route (under
Services/Routing
Service/Routing
).
1. At
Route:
, enter 002 (or any other available route number)
2. Choose the line pool where the discounted lines for calling
long distance have been placed. Example: Line pool B.
3. Then you need to assign the route to the destination code
and to the destination code schedules. (under
Services/
Routing Service/Dest Codes
)
4. At
DstCode:
enter a valid destination code.
Example: 1403
Refer to Dest codes on page 395.
Tip -
To view existing destination codes press
‘
before entering a new code.
Tip -
T he destination code can use a different route
depending on which schedule is being used. Refer to Services
in the Modular ICS 7.1 System Coordinator Guide for
information about using schedules. In the above example, the
system uses Route 002, which uses Line pool B, to take
advantage of the lower cost when the system is in normal
mode.