Nortel Modular ICS 7.1, Инструкция по установке

Страница: 444 / 700

444
/ System prgrming
Modular ICS 7.1 Installer Guide N0130943 02
Note: These settings do not apply to the 7000 and 7100 digital
phones and the Digital Mobility phone.
• If you want the call to be available to be picked up by other
members of the groups when you put a call on Hold, set
Invoke by Hold:
to
Y
. A flashing indicator appears beside
the SWCA key when the call assigned to that key is put on
Hold.
• If you want calls to remain on Hold only at the telephone
where the call is received, set
Invoke by Hold:
to
N
. Even
if you set this field to N, users can still put selected calls on
SWCA hold, by pressing a free SWCA key rather than the
Hold key to camp the call.
SWCA hold I/C (Y, N): If set to Yes, calls that arrive on the
intercom button, that are put on hold by the user, are
automatically associated with a SWCA code and are available
to other uses with access to that code once the call is parked.
Note that Invoke by Hold must also be set to Yes for this
feature to work.
Refer to the DN record section of this guide for information
about assigning non-visible SWCA call groups (
Capabilities
on page 345). The System Coordinator Guide provides a
section that describes how to add SWCA codes to buttons with
indicators. The
SWCA User Card explains how to use the
feature.