Nortel Modular ICS 7.1, Инструкция по установке

Страница: 338 / 700

338 / Terminals&Sets
Modular ICS 7.1 Installer Guide N0130943 02
1. Enter the line number. The display shows the line number
and its assignment.
2. Press
≠
until the display shows Appearances:1.
3. Press
CHANGE
and enter the number of target line
appearances.
4. Press
®
to exit or
‘
to continue programming.
Tips -
Press
SCAN
to view the lines assigned to this
telephone.
In general, auto-answer loop start trunks, auto-answer E&M
trunks, and DID trunks are not assigned to telephones. If
assigned, they are used for monitoring incoming call usage, or
for making outgoing calls (auto-answer loop start and E&M
trunks).
In general, fixed data channel trunks are not assigned to
telephones. If assigned, they are used for monitoring call
usage.
You cannot assign a line that is private to another telephone.
Each line assigned to appear at a telephone must appear at a
button with an indicator on that telephone. The maximum
number of line buttons are eight for the 7208 digital phone, 10
for the 7316 and 7316E digital phones.
If you set a line to Ring only, incoming calls appear on an
intercom button.
The 7100, 7000 digital telephones and the Digital Mobility
phones have no line buttons or intercom keys, but can be
assigned any number of lines. However, only two calls can be
received at a time. Ensure that the lines assigned to these
telephones are assigned to ring; otherwise, you cannot detect
incoming calls on the lines.