Nortel Modular ICS 7.1, Инструкция по установке

Страница: 428 / 700

428
/ System prgrming
Modular ICS 7.1 Installer Guide N0130943 02
Assigning a distinctive ring pattern to a Hunt Group
You can assign distinctive ring patterns to your Hunt Group so
that calls can be rated in priority for the group.
These distinctive ring patterns have the same characteristics as
for line and extension distinctive ring patterns. Refer to
Programming distinctive ring patterns on page 376.
The Hunt Group distinctive ring pattern determines how a call
will ring within the Hunt Group. If members of the group have
ring patterns assigned to their telephones that are higher than
the ring patterns of the incoming line or the Hunt Group, then
the Hunt Group will use the ring of the corresponding member
telephones. If the incoming call (line) has a higher ring pattern
assigned, than the Hunt Group, the Hunt Group will ring with
the line ring pattern.
1. Find the heading
Hunt groups
.
2. Press
≠
until the display shows
Member extns:
.
3. Press
‘
until the display shows
Dstnct Ring:NONE
.
4. Press
CHANGE
to toggle to the ring pattern number you
want to assign to the Hunt group line. (
None, 2, 3, 4
)
5. Press
®
to exit or
‘
to continue programming.