Nortel Modular ICS 7.1, Инструкция по установке

Страница: 640 / 700

640 / Glossary
Modular ICS 7.1 Installer Guide N0130943 02
ringing and visual indication of
incoming calls for other telephones, and
answer those calls when necessary.
One telephone can have up to eight
Answer assignments. An Answer DN is
automatically assigned to a telephone
memory button, if any are available. If
no buttons are available, and on 7000
and 7100 digital telephones and Digital
Mobility phones, Answer DNs must be
set to Ring Only since there are no
button appearances.
Answer DN: The internal or directory
number (DN) of a telephone that is
monitored by another telephone. You
can assign up to eight Answer DNs to a
telephone under Line Access in
Terminals and Sets programming.
Autobumping:
≤°⁄fi
A feature that determines what the
system does with new Call Log items
when your Call Log is full. When
Autobumping is on, a new log entry
causes the oldest entry to be deleted. If
Autobumping is off, your Norstar
system does not log calls when your log
is full.
autodial button:
A memory button
that, if programmed, provides one-touch
dialing of external or internal numbers.
autolog options:
≤•°›
A feature that allows you to select the
type of calls that are stored in your Call
Log. You can choose to log calls that
were not answered by anyone within the
system, to log calls that were
unanswered at this telephone but which
were answered elsewhere in the system,
to log all calls answered and not
answered at this telephone, or to not
have calls automatically logged.
Automatic Dial:
A feature that allows
you to dial without having to pick up the
receiver or select a line. You must have
a prime line to use Automatic Dial.
Automatic Dial is assigned under
Dialing options
in
Terminals&Sets
programming.
Automatic handsfree:
A feature
which automatically activates handsfree
operation when you make or answer a
call. Automatic handsfree is assigned
under handsfree in
Terminals&Sets
programming.
Automatic Hold: A feature that
automatically places an active call on
hold when you select another
line.Automatic Hold (
Full AutoHold
)
is assigned in
Lines
programming.
Automatic Privacy: See Privacy.
Automatic Daylight Savings
Time:
A feature that switches the
system to standard or extended daylight
savings time at pre-programmed dates.
It is programmed under
AutoDS Time
in
System programming, Feature Settings.
Automatic Telephone
Relocation:
A feature that allows a
telephone to retain personal and system
programming when the telephone is
plugged into a different Norstar modular
jack.
Automatic Telephone
Relocation
is enabled under Set
relocation in
Sys prgrmmng
.
auxiliary ringer: A separate external
telephone ringer or bell which can be
programmed to ring when a line or a
telephone rings. An auxiliary ringer may
be programmed to ring only when the
system is in a particular schedule.
Programming of an auxiliary ringer is
done in
Services
programming after
the feature has been enabled under
Capabilities
in
Terminals&Sets
programming.
AWG:
American wire gauge.