Nortel Modular ICS 7.1, Инструкция по установке

Страница: 21 / 700

N0130943 02 Modular ICS 7.1 Installer Guide
Regulations
North American Regulatory Information
Safety
This equipment meets all applicable requirements of both the
CSA C22.2 No.60950 and UL 60950.
The shock hazard symbol within an equilateral
triangle is intended to alert personnel to electrical
shock hazard or equipment damage. The following
precautions should also be observed when
installing telephone equipment.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless
the jack is specifically designed for wet locations.
Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
Use caution when working with telephone lines.
DANGER: Risk of shock.
Read and follow installation instructions carefully.
Ensure the system and system expansion units are
unplugged from the power socket and that any
telephone or network cables are unplugged before
opening the system or system expansion unit.
If installation of additional hardware and /or servicing is
required, disconnect all telephone cable connections
prior to unplugging the system equipment.
Ensure the system and system expansion units are
plugged into the wall socket using a three-prong power
cable before any telephone cables are connected.