Nortel Modular ICS 7.1, Инструкция по установке, Страница: 371 / 700

Lines /
371
N0130943 02 Modular ICS 7.1 Installer Guide
Link at CO (loop trunks only)
Some exchanges respond to a Link signal (
≤‡⁄
) by
providing an alternative line for making outgoing calls.
• When
Link at CO
is set to
Y
(Yes), the system applies the
restrictions on outgoing calls to the digits dialed after the
Link signal, and the call on the alternative line will be
subject to all restrictions.
• Setting
Link at CO
to
N
(No) prevents a Link signal from
resetting the Norstar restrictions in cases where the host
exchange does not provide an alternative line.
Press
CHANGE
to select the setting:
Y
(Yes) or
N
(No).
For more information about host signaling options, refer to
Modular ICS 7.1 System Coordinator Guide .
Aux. ringer
This setting allows you to turn the auxiliary ringer on or off.
An auxiliary ringer can be programmed on a line or a
telephone. When programmed on a telephone, the auxiliary
ringer rings every time a call is received. When programmed
on a line, the auxiliary ringer does not ring when a transferred
call is received.
Press
CHANGE
to select the setting:
Y
(Yes) or
N
(No).
Tips -
The auxiliary ringer is an optional device that
should be connected by the installer.
If you have an auxiliary ringer programmed to ring for calls
on an external line, and you transfer a call on that line without
announcing the transfer, the auxiliary ringer will ring for the
call transfer.