Nortel Modular ICS 7.1, Инструкция по установке

Страница: 376 / 700

376
/ Lines
Modular ICS 7.1 Installer Guide N0130943 02
Programming distinctive ring patterns
When lines are configured on your system, they can be
assigned one of four distinctive ring patterns (DRP). The
default for all telephones is
1
. The default for lines is None,
which is the lowest priority.
Call ringing: When multiple calls are presented to the
telephone, the call with the highest priority DRP setting will be
the call that rings at the telephone.
Call answering: When multiple calls are presented to a
telephone, and the user picks up the handset, the call with the
highest priority DRP setting is the call that is presented.
TIPs -
External calls always have a higher priority than
internal calls.
If the ring type is changed on a telephone after the DRPs are
set on the line, the line DRPs are overwritten by the telephone
settings.
If the line DRPs are set after telephone programming, then the
telephone ring programming is overridden by the DRP. Refer
to the Modular ICS System Administrator Guide for details
about setting ring types on a telephone.
If Hunt group DRP has a higher priority than the line DRP, the
system will use the Hunt Group DRP within the Hunt Group.
(Refer to Allowing/disallowing an auxiliary ringer on page
427.)
Note: Digital Mobility phones do not have access to this
feature.