Nortel Modular ICS 7.1, Инструкция по установке

Страница: 350 / 700

350 / Terminals&Sets
Modular ICS 7.1 Installer Guide N0130943 02
There will also be variations of each sequence that you will
want users to be able to dial. Sequences that can be dialed are
called overrides.
Once you create the filters, you can assign the restrictions to a
telephone (
Terminals&Sets
), to a line (
Lines
), to a
particular line on a telephone (
Terminals&Sets
), and to
remote callers (
Remote access
).
1. Press
≠
and enter the number of the restriction
filter you want to program, or press
‘
to move
through all the available filters.
2. Press
≠
to see the first restriction in the filter.
The first four digits of the number that will be denied are
included in the display. The full number can be seen by
pressing
≠
again.
3. Use
ADD
, the dialpad, and
OK
to program a restriction for
each filter.
4. Press
‘
when the full restricted number is on the
display (it shows
Deny:
and the number) to see any
overrides to the restriction.
5. Use
ADD
, the dialpad, and
OK
to program overrides for each
restriction filter.
6. Press
ANY
to enter a wild card character that represents any
digit in a sequence of numbers when denying numbers or
creating overrides.
7. You can press
REMOVE
to delete a restriction.
The overrides will be deleted as well and the restrictions
will renumber to fill the gap.