manualshive.com logo in svg

Nortel Modular ICS 7.1, Инструкция по установке, Страница: 514 / 700

Поделиться
Скачать
Nortel Modular ICS 7.1 Скачать руководство пользователя страница 514

514

 / Hardware

Modular ICS 7.1 Installer Guide

N0130943  02

Network DNs

1. Press 

≠

 to display the DNs which are used with 

the SPID.

2. Press 

ADD

 and enter the appropriate number to assign 

additional Network DNs to the SPID.

The Modular ICS can have a maximum of 128 Network DNs 
for the system. There is no limit to the number of Network 
DNs for each SPID, but you cannot exceed the limit of 128 
Network DNs for the system.

If the Network DN you try to enter is already assigned to a 
SPID with a call type of Both, you will not be able to assign 
the DN again. 

If the Network DN you enter is already assigned to a SPID and 
the call type is Voice or Data, it will be automatically 
programmed with the unused call type. For example, if the DN 
has Call type set to Voice in the previous SPID assignment, it 
will be automatically set to handle Data calls when the same 
DN is added to the other SPID.

Call type

Press 

CHANGE

 to select the call type of the Network DN: 

Voice

, 

Data

, or 

Both

.

CHANGE

 will not appear if the Network DN is already in use by 

the system and the call type will be automatically programmed 
with the unused call type. For example, if the DN has Call type 
set to 

Voice

 in a previous SPID assignment, it will be 

automatically set to handle Data calls when the DN is entered 
the second time.

Содержание Modular ICS 7.1





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов