Nortel Modular ICS 7.1, Инструкция по установке

Страница: 399 / 700

Services /
399
N0130943 02 Modular ICS 7.1 Installer Guide
Setting up a route for local calling
Installer password required
An office may have different suppliers for local and long
distance telephone service. By programming a destination
code, any call that begins with 9, the most common dialout
digit, will automatically use lines dedicated to local service.
The first step is to build a route (under
Services/Routing
Service/Routing
).
1. At
Show route:
enter 001 (or any other available route
number)
2. Press
SCAN
to view defined routes and press
CLEAR
to erase
a defined route.
3. Choose the line pool that contains the lines for local
calling.
4. Enter the DialOut digits (if any) which are needed to direct
the call once it is connected to an external line.
Note: For local calls only, there are no DialOut numbers.
Compare this with Setting up a route for long distance
calling on page 401.
5. Now you need to set up a destination code that will use this
route during the various schedules. Since users will dial 9
to make an external call, 9 should be the destination code.
(
Services/Routing Service/Dest Codes
)
6. At
Show DstCode:
press
ADD
and enter 9.
Tips -
If entering a code other than 9, a valid destination
code must be used. See Dest codes on page 395.
To view existing destination codes press
‘
before
entering a new code.