Nortel Modular ICS 7.1, Инструкция по установке

Страница: 340 / 700

340 / Terminals&Sets
Modular ICS 7.1 Installer Guide N0130943 02
• Lines from multiple DTI cards (PRI) can belong to the
same pool if they are configured with the same protocol.
• PRI lines are assigned to pools with the
Line type
setting
under Lines programming.
Prime line
This setting assigns a prime line to the telephone. A prime line
is the first line that is automatically selected when the handset
is lifted.
Press
CHANGE
to select one of these settings:
None
,
Pool
(A to O), or
I/C
(intercom). Only assigned lines and line
pools appear.
PRI pools are not valid selections for a Prime line.
Tips -
An assigned prime line is not associated with the
assignment of a prime telephone.
• An external line must be assigned to the telephone in
Line assignment before it can be assigned as the prime
line to the telephone.
• A line pool must be assigned to the telephone in line pool
access before a line pool can be assigned as the prime
line to the telephone.
• A target line cannot be a prime line for a telephone
because it is incoming-only.
• A DID line should not be assigned as the prime line for
a telephone. If assigned, it is treated as if no prime line
has been assigned. The message
Select a line
appears
when the receiver is lifted.