Nortel Modular ICS 7.1, Инструкция по установке

Страница: 345 / 700

Terminals&Sets /
345
N0130943 02 Modular ICS 7.1 Installer Guide
causing the network to present an incorrect CLID to the
called party.
Note: You can program PRI lines to block outgoing name and
OLI. Refer to Send Name Display (PRI) on page 525.
Capabilities
Settings that control how the system interacts with individual
telephones and the calls they receive are found under
Capabilities
. The following table lists these headings. The
default settings are shown in bold.
Setting Description Options
Fwd no answer
Fwd to Redirect all incoming calls when this
telephone does not answer. Enter DN
None
Forward
delay Select the number of rings before an
unanswered call is forwarded. 2, 3, 4 , 6, 10
Fwd on busy Redirect all incoming calls when this
telephone is busy with another call. Enter DN
None
DND on Busy Select whether an incoming call rings if
the user is already on another call. Y, N
Handsfree Select whether handsfree will be
available to a telephone. Auto, Std
(Standard),
None
HF answerback Select whether a user can automatically
answer a voice call without lifting the
receiver or pressing the handsfree/mute
button. Y , N
Pickup grp Assign this telephone to a pickup group. None , 1 to 9
Page zone Assign this telephone to page zone. None, 1 to 6
Paging Select whether paging announcements
can be made from this telephone. Y , N
D-Dial Select whether you can call the Direct-
dial telephone from this telephone using
the Direct-dial digit. Set1 to Set5,
None