manualshive.com logo in svg

Nortel Modular ICS 7.1, Инструкция по установке, Страница: 208 / 700

Поделиться
Скачать
Nortel Modular ICS 7.1 Скачать руководство пользователя страница 208

208

 / Planning the installation

Modular ICS 7.1 Installer Guide

N0130943  02

•

When you upgrade to a 7.1 system, target lines are 
increased on mega systems by 32. Also on Mega systems, 
you can now install digital telephones on station modules 
installed in ports 13 and 14. Each slot supports 16 new 
terminal numbers.

 

Supported upgrades in MICS 7.1

When upgrading, Call Log information may be 
lost.

During a system restart, Call Log information is 
not saved. Make sure to notify users if a system 
restart is planned so any log information can be 
recorded first.

A loss of UTAM information occurs when 
upgrading US MICS-XC systems.

UTAM Recovery Codes are required. If you are 
upgrading the system to include Companion 
components.

Target Upgrade

MICS 

7.1

USA-MICS-XC 

7.1

CDA-MICS-XC 

7.1

Upgrading from...

MICS (all versions 

prior to 6.1)

For MICS versions1.0 thru 4.0 use the 4.1 Upgrade 
Tool; once complete, use the 6.1 upgrade tool, then 
load the MICS 7.1 software.
For versions 4.1 thru 6.0 use the 6.1 Upgrade Tool.
Once the upgrades are complete, load the MICS 7.1 
software.
Note that line numbering will change after this 
upgrade.

MICS (all versions) 

6.1 and 6.1 MR

Insert MICS CS ROM cartridge with appropriate 
software load.

Содержание Modular ICS 7.1





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов