Nortel Modular ICS 7.1, Инструкция по установке

Страница: 437 / 700

System prgrming /
437
N0130943 02 Modular ICS 7.1 Installer Guide
Press
CHANGE
to choose
Y
or
N
.
Call log
This feature allows you to specify how calls to a telephone are
logged.
Press
CHANGE
to select either:
Set
or
Line
.
Set
: enables call logging for all external calls directed to the
telephone.
Line
: enables call logging, on a per-line basis, for any line
assigned to the telephone. Note: The line does not have appear
on the telephone buttons. Use the Call Log Set feature under
each telephone record to indicate which lines will log calls.
Refer to
Call log set on page 358.
Ensure that the user has adequate space for the expected call
logs. Each user can also activate autobumping, to ensure that,
when the log is full, old logs are deleted to allow room for new
records.
Call log space
Call log space programming customizes how log space is
allocated to telephones in the system.
Reset all logs
allows you to reallocate the Call log space
equally to all telephones in your system.
WARNING: If you change this value on a
configured system, all existing logs will be
deleted.